Technical Specifications - Bronpi HYDRO Serie Instrucciones De Instalación, Uso Y Mantenimiento

Card
Tarjeta
INIFH20
INIFH20
Going
Grupo
group
Ida
• KIT-2. (see drawing D12.2). Interconnected module between installations with an open-close expansion vessel and a closed vessel
with electronic control included. It allows to manage the heat for domestic heating from two alternative sources of energy whose circuits are
hydraulically separated.
Operation:
The module allows to intercommunicate with the domestic heating by adding to the heat generated by a traditional gas boiler (or similar)
the heat produced by an alternative heating source. This is possible thanks to a thermal exchanger that allows to transfer the heat between
two circuits hydraulically separated, one of them with a closed vessel (boiler) and another one with an open vessel (alternative heat source,
usually a wood-burning thermo-stove). In order to make this the kit is provided with:
• A plates exchanger.
• Two pumps.
• A diverter valve.
• An electronic control
Actuador Actuator
Detector Flow
Intercambiador Heat exchanger
detector
de flujo
Circulator
Circulador
Return group Grupo retorno
31
THERMO-STOVE
D12.1

TECHNICAL SPECIFICATIONS

- Dimensions
Length 402mm.
Height 190mm.
Depth 250mm.
- Electrical specifications
Power supply 230Vac. Frequency 50Hz.
Power input 80W.
- Hydraulic connections
Heating thermo-stove fitting G 3/4" – 1
Installation fitting G 3/4"
Sanitary fitting G 1/2"