Models Hydrobronpi-E And Hydrobronpi-E Vision - Bronpi HYDRO Serie Instrucciones De Instalación, Uso Y Mantenimiento

7.1

MODELS HYDROBRONPI-E AND HYDROBRONPI-E VISION

Below you can see a basic scheme (not functional) of a hydraulic type installation.
Open
expansion
vessel
Drainpipe
Safety valve
Return
• Connection to the heating circuit
The model has a 1" connection at the top right. We will use this connection to connect the heating circuit output (one way) (see drawing
D7.1).
In the bottom left, you will find another 1" connection. We will use this to connect the return of the heating circuit (see drawing D7.2).
D7.1
• Safety elements connection
This boiler, has the possibility of connecting a thermostatic cooling valve
that is optionally supplied to the boiler, whose mission is to lower the water
temperature, providing cold water from the network, in the event that it rises
above 90ºC (see drawing D7.4).
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
Hot water
Going
Pump
This boiler has the possibility of connecting a case to introduce a temperature
reading probe of the fluid. This connection is located at the top of the right side
of the boiler (see drawing D7.3):
Case connection
D7.3
Safety valve connection
D7.5
Water network
Anti-condesation valve
D7.2
In this boiler, the overpressure or safety valve of 3 bar that is supplied
with the boiler will be placed in the ½"connection, existing in the upper
right part of the boiler (see drawing D7.5):
27
Radiator
Cold water
Thermostatic valve
connection (optional)
D7.4
HYDRO RANGE