Stihl RL-MM Manual De Instrucciones página 11

English / USA
Do not operate using the starting throttle
lock as you do not have control of the
engine speed. See section of your
MultiEngine instruction manual on the
proper use of the slide control.
If the cutting tool or deflector becomes
clogged or stuck, always turn off the
engine and make sure the cutting tool
has stopped before cleaning. Grass,
weeds, etc. should be cleaned off the
cutting tool at regular intervals.
!
Warning!
During work, check the tightness and the
condition of the cutting tool at regular
intervals. If the behavior of the cutting
tool changes, stop the engine
immediately, and check the cutting tool
for cracks and damage. Replace
cracked, bent, warped, damaged or dull
cutting tools immediately. Such cutting
tools may shatter at high speed and
cause serious or fatal injury.
10
Do not attach any blade to a unit without
proper installation of all required parts.
Never use unauthorized parts to secure
the blades. Failure to use the proper
parts may cause the blades to fly off and
seriously injure the operator or
bystanders.
Important adjustments
!
Warning!
To reduce the risk of personal injury from
loss of control or contact with the
running cutting tool, do not use a cutting
tool with incorrect idle adjustment. At
correct idle speed, the cutting tool
should not move. For directions on how
to adjust idle speed, see the appropriate
section of the MultiEngine instruction
manual.
If you cannot set the correct idle speed,
have your STIHL dealer check your
engine and make proper adjustments
and repairs.
MAINTENANCE, REPAIR AND
STORING
I
f you claim warranty coverage for a
component which has not been
serviced or maintained properly or if
nonapproved replacement parts were
used, STIHL may deny warranty
coverage.
!
Warning!
Use only original STIHL replacement
parts for maintenance and repair. Use of
non-STIHL parts may cause serious or
fatal injury.
Follow the maintenance and repair
instructions in the appropriate section of
your owner's manual. Please refer to the
maintenance chart on the last pages of
this manual.
Additionally, the daily maintenance
schedule for your power tool set forth in
your STIHL instruction manual should
be strictly followed.
RL-MM