Angelo Po 1G1FAPG Manual De Uso página 48

INSTALLATION OF DISMANTLED PARTS
The appliance is delivered with some components
dismantled and they have to be fitted during instal-
lation. Specifically, the floor-mounted feet must be
fitted (A).
LEVELLING
Adjust the floor-mounted feet (A) to level the appli-
ance.
ASSEMBLING APPLIANCES IN BANKS
IT
To assemble appliances in banks (side by side)
proceed as described below.
GB
1-Pull off the knob (A).
2 - Undo the scr ews (C) and remo ve the control
panels (B).
DE
3 - Apply masking tape to the edges to be placed
side by side.
FR
4 - Apply food-approved sealant to the edges to be
placed side by side.
ES
5 - Place the appliances side by side.
6 - Connect the appliance using the screws and
nuts (D-E).
7 - Remove the excess sealant and the masking
tape.
8 - Apply the sealant to the inside of the lid (F), and
fit it to cover the fixing zone.
9 - Replace the control panels (B) and the knobs
(A) on completion of the operation.
English
A
C
A
B
D
D E
- 18 -
IDM-39618301000.tif
A
IDM-39603610000.tif
F
E
IDM-39618301100.tif