Year Warranty; Specific Information - Camp Safety BLOCCANTI Manual De Instrucciones

misuse of or from modifications to a CAMP Safety branded product. It is the user's responsibility at all times to ensure that
he/she understands the correct and safe use of any equipment supplied by or from C.A.M.P . spa, that he/she uses it only
for the purposes for which it is designed and that he/she practices all proper safety procedures. Before using the
equipment, take all necessary steps to familiarise yourself with rescue techniques should an emergency occur. You
personally assume all the risks and responsibilities for your actions and decisions: if you are not able or not in a position to
assume these, do not use this equipment.

3 YEAR WARRANTY

This product is warranted against any faults in materials or manufacture for 3 years from the purchase date. Limitations of
warranty include: normal wear and tear, modifications or alterations, incorrect storage, corrosion, damage due to
accidents or negligence, use for which this product is not specifically designed.

SPECIFIC INFORMATION

INSTRUCTIONS FOR USE
Summary
CAMP "Pilot", "Solo", "TurboChest", "Solo 2" and "Lift" are roe adjustment devices for the industry certified in accordance
with standard EN 12841 type B (work line ascenders), and rope clamps for mountaineering certified in accordance with
standard EN 567.
Use (general information)
Insert the rope clamp on the rope as illustrated in fig.1. The raised arm reference marked on the product indicates the
direction of the upper end of the rope. After installing always conduct a locking test to verify correct insertion direction
(fig.2). Always check the correct closure of the attachment hole connector [2] on the locking structure [1]. Check that the
external elements do not prevent correct motion of the moving parts. For progression see Fig. 3; always hook the attack
point hole to your harness using compatible ropes and/or connectors. If you need to make a brief descent, first move the
lock slightly upward, release the cam [3] with your finger and then descend the desired length (do not touch the safety
button [4]) fig.4. To prevent accidental release of the Pilot/Solo/Solo 2 we recommend inserting a connector in the safety
hole [5] (fig.5). Do not hook to the progression safety hole. During progression it may be helpful to use a support for your
feet (fig.8).
Never ascend above the anchor and avoid creating any slack on the rope (fig.6).
The resistance of the clamps on the ropes of the specified diameters and types is at least 4kN and can be reduced with
worn/damaged ropes. The clamps should only hold the weight of one person.
The load must always be applied in parallel to the rope direction. Use on crossings requires greater experience and
presents greater problems with use: take particular care.
Avoid any dynamic stress that may damage the rope. Avoid and reduce to a minimum the use of clamps on dirty or icy
ropes: safety may be reduced or compromised. Do not use the clamps for self-belaying.
25