Display Alarms - Tennant VLX Manual De Instrucciones

Error code
PAUSE MOTOR
PAUSE DRIVE
BRUSH CURRENT
CHANGE OIL
BATTERY RESERVE
BATTERY
DISCHARGED

DISPLAY ALARMS

Machine behaviour
Drive stops
Drive stops
The working functions
are disabled
This is only shown if
the machine has a
combustion engine
This is simply a
warning that the
battery charge is
getting low
The machine's
functions are stopped,
excluding drive
Description of the
problem
Drive motor
overtemperature >
95°C.
Alternator
overtemperature >
150°C
Electronic
control circuit
overtemperature >
85°C
Excess current or
centre brush blocked
It is activated after 99
operating hours
It is shown when the
battery voltage falls
below 21.3V
If the voltage read
falls below 20.3V
for 3 seconds
consecutively
EN
Possible solution
If having driven up a
slope this may can be
normal, let the motor
cool down for 20
minutes.
Check that the cooling
fan is working
Check that the brake
is not locked.
Check that the front
wheel turns freely.
If the air temperature
is high, stop the
machine for 20
minutes, then start
again. If the problem
remains, contact a
service centre.
Check free brush
movement or for
the presence of any
impediments (ropes,
plastic and so on)
It warns the operator
to change the engine
oil (to reset it, press
the display button
for 5 seconds while
the hour counter is
displayed)
No action needed,
except to charge the
battery
Charge the battery
23