Adjusting The Side Brushes For Wear - Tennant VLX Manual De Instrucciones

• the
key removed.
• lift the cowling.
• unplug the battery connector from the
machine
• plug the battery connector into the
• connect the battery charger to the mains.
• after charging, disconnect the batteries
from the battery charger and reconnect
them to the machine
.
ADJUSTING THE SIDE
BRUSHES FOR WEAR
If the side brushes (when lowered) do not
adjusted as follows:
• Move the side brush to the working
position.
• Loosen the two adjustment screws
• Manually move the brush to the required
position.
• Tighten the adjustment screws.
EN 18