Enter the menu by pressing and holding the display button for 5 seconds while the machine is on,
but with no active function.
Pressing button P1 increases the value of the selected variable.
Pressing button P3 decreases the value of the selected variable.
Pressing the display button, the set data is saved and the next item is displayed.
Exit the menu by pressing and holding the display button for 5 seconds.
1.
LANGUAGE, language setting parameter.
2.
PROG.1, brush pressure P1 parameter. Default value 020.
3.
PROG.2, brush pressure P2 parameter. Default value 040.
4.
PROG.3, brush pressure P3 parameter. Default value 060.
5.
POWER OFF, enables/disables the AUTO-POWER ON/OFF system. Default value YES.
6.
RAISE BRUSH, enables/disables lifting of the centre brush in reverse. Default value YES.
7.
time. Default value 120".
Enter the menu by pressing buttons P1 and P3 and turning the ignition key to "ON"; the display
Press the Display button four times, select the type of battery installed (GEL or ACID) by pressing
button P1 or P3.
To save the settings and exit the menu, press and hold the Display button until the display shows
the software version installed.
"OFF".
USER MENU
TECHNICAL MENU
EN
START
O FF
26