Change Oil" Alarm Code - Tennant VLX Manual De Instrucciones

"CHANGE OIL" ALARM
CODE
The CHANGE OIL error code tells the operator
to change the combustion engine oil every 100
operating hours (only active on combustion
engine versions). Pressing the display button
counter for the combustion engine.
left (0-9 range) and the three remaining digits
display the actual hours of work of the engine.
When having reached 100 operating hours, the
machine shows the "CHANGE OIL" message
to change the engine oil (see the chapter
"COMBUSTION ENGINE MAINTENANCE").
After having changed the engine oil, reset the
hour counter as follows:
• press the display button twice to view the
partial operating hour counter.
• press the display button again and hold it
for at least 5 seconds (the machine partial
operating hour counter will be reset). The
unit, so that the operator will know how
many times oil has been replaced.
EN 20