Transport And Storage; General Information - Kemper Clean Air Tower Instrucciones De Uso

CAUTION
− There is a risk of severe damage to the respiratory organs and
respiratory system - use protection of respiratory system, such
as KEMPER autoflow XP or a respiratory mask with FFP2 class
filter according to EN 149 standard.
− Skin contact with dust, etc. can result in irritation inf sensitive
individuals - wear protective clothing.
− Dust may get in atmosphere in case of leakage of the filtration
unit and piping. Repair any leakage immediately and clean the
contaminated place; wear respiratory system protection and
protective clothing.
− It is necessary to release expanding compressed air at first
before start of any repair, adjustment and maintenance
operations on the pneumatic system!

4 Transport and storage

4.1 General information

If any modifications of the filtration device should be made, it may be advisable to
have such modifications made by KEMPER GmbH. The device must be transported
back to KEMPER GmbH for this purpose.
DANGER
Life endangering injuries when lifting and transporting
individual components of the filtration device
Improper lifting and transportation can result in tipping over and
falling of the components of the filtration device!
Lift individual components of the filtration device only using
single lifting unit! The admissible loading value of the lifting
system may not be exceeded.
Do not ever stand under suspended loads!
Serial No.: 1502206
Technical modifications without previous notification and errors reserved.
KEMPER CleanAirTower Instruction manual - EN
- 62 - Rev.: 1
Status as of: 05/2014