Baby auto TEKIE Manual De Uso página 29

13. Do not leave heavy objects inside the car, as these may injure the child
in the event of an accident.
14. Make sure that the buckle is correctly fastened so that the child can be
quickly freed in case of emergency.
15. The safety seat's rigid and plastic elements should be positioned and
installed so that they cannot be trapped by a moving seat or a door
during everyday use of the vehicle.
16. Do not disassemble, modify, or add any piece to the child seat or
harness, as this would seriously affect its basic functioning and the
safety that the child seat provides.
17. The safety seat must remain installed in the vehicle with the safety belt,
even if the child is not seated in the child seat. The child must never be left
unattended while seated in the safety seat, not even outside the vehicle.
18. Keep the safety seat away from corrosive products.
19. Do not use anchor points that are not listed in the instruction manual
and indicated on the seat.
20. The seat should be replaced after undergoing the violent stresses
associated with an accident.
21. The manufacturer guarantees the quality of its products, but not the quality
of second-hand products or products belonging to other companies.
22. Instruction illustrations are for informational purposes only. The child
restraint system may contain small differences compared to the
photographs or images in the instruction manual. These variations do
not affect its certification under ECE Regulation R44/04.
23. Ensure that any strap or belt that holds the child is not bent or twisted
and keeps tightened. Act under the same criteria with the vehicle belts
that serve as a restraint for the seat.
29