Publicidad
Idiomas disponibles
Idiomas disponibles
8. Place the shoulder belt part and the lap belt part on the vehicle buckle
side through the guides
9. Pass the upper part of the shoulder belt through the headrest guide
for Group 2/3
not twisted (fig. 7.9 B).
10. Ensure that the shoulder belt part passes over your child's collarbone
and not his/her neck. If not, adjust the height of the headrest.
CAUTION! The lap belt part must be positioned as low as possible over
the child's hips on both sides.
CLEANING AND MAINTENANCE
8.
1. Straps and plastic parts should be cleaned using a neutral detergent
and warm water.
2. Make sure soap does not enter the buckle or other metal parts.
3. Do not use chemical products or bleach on any part of the seat.
WASHING INSTRUCTIONS:
• The cover is removable and can
be washed at 30°. It should not
be machine dried.
• Machine wash – Cold cycle.
• Do not bleach.
If you have any doubts or queries regarding the use or placement of this
product or you need any replacement elements, please contact our Customer
Services Department.
38
(T)
of the safety seat (fig. 7.9 A).
(B)
until it is completely extended in the guide and is
• For dry cleaning use
any solvent except
trichloroethylene.
• Do not use a drier.
• Do not iron.
30 °C
Publicidad
