Publicidad
Idiomas disponibles
Idiomas disponibles
17. Pull the harness adjustment belt
snugly, without being too tight (fig. 4.18).
18. Pull the rotation system
installation, positioning the seat in a rearward-facing direction (fig.
4.19 and 4.20).
5. INSTALLING THE SAFETY SEAT IN FORWARD-FACING
POSITION.
WARNING
1. Locate the ISOFIX arms
them out by pressing the ISOFIX system's unlock button
TIP: The ISOFIX attachment points are found between the base and the
back of your vehicle seat.
2. Ensure that the five-point harness of the safety seat is installed
correctly (please consult Section 3).
3. Follow the steps described in Section 3.2.
4. Rotate the seat by pulling the lever
seat in a forward-facing direction.
5. Make su re that the arms of the ISOFIX system
CAUTION! Advance to the next step once you have deployed the
ISOFIX arms fully, and the indicator appears red (fig. 5.2).
6. Place the safety seat on the vehicle seat.
7. Hold the safety seat in place with both hands and insert the two arms
of the ISOFIX system
the locking arms click into place on both sides. The red indicator will
change to green on both sides (fig. 5.3 and 5.4).
8. Shake the safety seat to check that it has been anchored correctly to
your car's ISOFIX points.
9. Push the safety seat against the back of the vehicle seat (fig. 5.5).
10. Press the support leg adjuster button
deploy the support leg
34
(K)
GROUP 1 (ISOFIX)
(Q)
(Q)
(J)
until it is firmly supported on the floor (fig.
(G)
so that it fits your child's body
and rotate the safety seat to complete the
Only GROUP 1. From approx.
9 months to 4 years (9-18 kg)
situated at the base of the safety seat. Pull
(K)
until you have positioned the
into the vehicle's anchoring points until
(U)
as indicated in fig. 5.6 to
(R)
(fig. 5.2).
(Q)
are fully extended.
Publicidad
