Pratissoli MK Serie Manual De Reparación página 58

Insert the suction valve unit (pos. , Fig. 94) and then the
spacer (pos. , Fig. 95).
The complete valve unit must be fully inserted into the
bottom and should look like the image in pos. , Fig. 95.
Assemble the O-ring, exploded view pos. 5 (pos. , Fig. 96)
and the anti-extrusion ring, exploded view pos. 15 (pos. ,
Fig. 96) on the outlet valve housing.
Insert the outlet valve unit (pos. , Fig. 97). The valve unit
must be fully inserted into the bottom and should look like
the image in pos. , Fig. 98.
Fig. 94
Fig. 95
Insert the anti-extrusion ring, exploded view pos. 16 (pos. ,
Fig. 99).
Fig. 96
58
Fig. 97
Fig. 98
Fig. 99