Pratissoli MK Serie Manual De Reparación página 64

Join the seals support to the liner (pos. , Fig. 128).
Mount the oil seal in the oil seal cover (pos. , Fig. 129) using
a buffer code 27910900.
Position the O-ring (pos. , Fig. 130) in the seat of the oil seal
cover and insert the assembly mounted in the casing into the
seat (pos. , Fig. 131).
Fig. 128
Make sure that the cover completely enters its seat (pos. ,
Fig. 132) being careful not to damage the lip of the seal ring.
Screw in the oil seal covers using 2 x M6x14 screws (pos. ,
Fig. 133).
Fig. 129
Calibrate the screws with a torque wrench as indicated in
Fig. 130
chapter 3.
64
Fig. 131
Fig. 132
Fig. 133