Ottobock 430H2 Instrucciones De Uso página 14

3) Allow to air dry.
INFORMATION: In order to avoid mould formation, the foam pad must be completely
dry before putting it into the cover.
INFORMATION
Do not wash or tumble-dry foam pad.
9 Disposal Information
All components of the product must be disposed of properly in accordance with the respective
national environmental regulations.
10 Legal information
All legal conditions are subject to the respective national laws of the country of use and may vary
accordingly.
10.1 Liability
The manufacturer will only assume liability if the product is used in accordance with the descrip­
tions and instructions provided in this document. The manufacturer will not assume liability for
damage caused by disregard of this document, particularly due to improper use or unauthorised
modification of the product.
10.2 CE Conformity
This product meets the requirements of the European Directive 93/42/EEC for medical devices.
This product has been classified as class I accessories according to the classification criteria out­
lined in Annex IX of the directive. The declaration of conformity was therefore created by the man­
ufacturer with sole responsibility according to Annex VII of the directive.
10.3 Warranty
Further information on the warranty terms and conditions can be obtained from the qualified per­
sonnel that has fitted this product or the manufacturer's service (see inside back cover for
addresses).
10.4 Service Life
Expected service life: 2 years.
The design, manufacturing and requirements for the intended use of the product are based on the
expected service life. These also include the requirements for maintenance, ensuring effective­
ness and the safety of the product.
Using the product beyond the specified expected service life leads to increased residual risk and
should only happen subject to the due diligence and deliberations of qualified personnel.
If the service life is reached, the user or a responsible attendant should contact the qualified per­
sonnel who fitted the product or the manufacturer's service (see inside rear cover or back page
for address). Here the user can obtain information about known risks and the current options for
refurbishing the product.
1 Avant-propos
INFORMATION
Date de la dernière mise à jour : 2016-10-04
► Veuillez lire attentivement l'intégralité de ce document avant d'utiliser le produit.
► Respectez les consignes de sécurité afin d'éviter toute blessure et endommagement du pro­
duit.
14
Français