Load Shed Troubleshooting - Generac G0060980 Manual Del Propietário

Troubleshooting
5.4 — Load Shed Troubleshooting
Symptom
Generator stalls when large load is
supplied.
Large loads keep getting shed and
locked out (load LED goes out for
30 minutes).
Output voltage is low/high.
Generator does not pull full power.
40
Table 5-4. Load Shed Diagnostics
1) Total load is too big for the generator and fuel type. Contact installing dealer
to correct installation.
2) A large load is not wired through the Loadshed module. Contact installing
dealer to correct installation.
Total load is too big for generator. Contact installing dealer to correct installa-
tion.
Voltage calibration incorrect. Contact servicing dealer.
Current calibration incorrect. Contact servicing dealer.
Possible Causes
Synergy Automatic Standby Generator Owner's Manual