Interacoustics EyeSeeCam vHIT Manual De Instrucciones página 39

EyeSeeCam vHIT Instructions for Use – EN
You need to complete at least one run of each protocol, Lateral, RALP and LARP. If you choose to run a
protocol more than one time, then you can use the check marks to decide which run from each protocol
you wish to display in your EyeSeeSix Report. You are only allowed to have one check mark per protocol
(RALP,LARP and Lateral) if you want to generate an EyeSeeSix Report.
Figure 4-289 EyeSeeSix Report
What you see in the report are 5 main things:
1. Raw tracings
Raw tracings show the impulse data overlaying the eye head movements. The impulses are shown
in red if they stimulate a right sided canal (R-lateral, R-posterior and R- anterior) and blue if they
stimulate a left sided canal (L-lateral, L-posterior and L-anterior).
2. Regression plots
Allows for graphical data analysis over the entire velocity range of the head impulses
Page 32