Depth Of Information; Scope - SICK IN4000 Standard Manual Del Operador

1
Chapter
Note
148
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice 8010934/WQ88/2013-01-15
About this document
1.3

Depth of information

These operating instructions contain information on
the non-contact safety switch IN4000 Standard on the
following subjects:
Mounting,
Electrical installation,
Hardware commissioning,
Fault, error diagnosis and troubleshooting,
Part numbers,
Conformity and approval.
The planning and use of protective devices such as
the IN4000 Standard also require specific technical
skills that are not detailed in this document.
When operating the IN4000 Standard the national,
local and statutory rules and regulations must be
observed.
General information on the subject of safety
technology is given in the guidelines "Safe Machinery".
We also refer you to the SICK homepage in the
Internet at:
http://www.sick.com.
Here you will find information on:
Sample applications,
A list of frequently asked questions regarding the
IN4000 Standard.
1.4

Scope

These operating instructions are original operating
instructions.
These operating instruction apply to the non-contact
safety switch IN4000 Standard.
Operating Instructions
IN4000 Standard