Mounting The In40; Fig. 4: Minimum Distances On Mounting The In40-D0101K Safety Switch - SICK IN4000 Standard Manual Del Operador

Operating Instructions
IN4000 Standard
Fig. 4: Minimum
distances on
mounting the
IN40-D0101K
safety switch
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice 8010934/WQ88/2013-01-15
Mounting
Pay attention to safe switch off distance and enable
zone (cf. Tab. 1).
The minimum distances stated in Fig. 4 for
neighbouring sensors, sensors mounted opposite
and the minimum distances to fixed parts of the
plant and walls must be observed.
The IN40-D0101K safety switch must be mounted
such that the sensing face is orientated towards the
moving part of the guard (door or similar). The
sensing face can be aligned if required.
4
Chapter
169