Correct Use - SICK IN4000 Standard Manual Del Operador

2
Chapter
152
© SICK AG • Industrial Safety Systems • Germany • Subject to change without notice 8010934/WQ88/2013-01-15
On safety
EN ISO 13855, Safety of machinery – The position-
ing of protective equipment in respect of approach
speeds of parts of the human body
EN 60204<1, Electrical equipment of machines
EN 60947<5-3, Specification for low-voltage
switchgear and controlgear — Control circuit devices
and switching elements
EN 60947<5-1, Specification for low voltage switch
gear and control gear; Control circuit devices and
switching elements. Electromechanical control
circuit devices
EN 61000<6-2, Electromagnetic compatibility
(EMC). Generic standards. Immunity standard for
industrial environments
The safety switches must be regularly subjected to a
technical inspection as per section 6.2.
2.3

Correct use

The IN4000 Standard series safety switches must be
used only as defined in chapter 2.2 "Applications of
the safety switches". The safety switches are only
allowed to be installed by qualified safety personnel
and are only allowed to be used on the machine on
which they have been installed and commissioned by
qualified safety personnel as per these operating
instructions.
All warranty claims against SICK AG are forfeited in
the case of any other use, or alterations being made
to devices, even as part of their mounting or
installation.
Operating Instructions
IN4000 Standard