Stihl TSA 230 Manual De Instrucciones página 13

Grip: Never use the cut-off machine with
one hand. Always hold the cut-off
machine firmly with both hands. Place
your left hand on front handle bar and
your right hand on rear handle and
trigger switch. Left-handed users should
follow this instruction too.
Wrap your fingers tightly around the
handles, keeping the handles cradled
between your thumbs and forefingers.
Make sure your cut-off machine handles
and grip are in good condition and free
of moisture, pitch or grease.
Never touch a rotating wheel with your
hand or any part of your body.
WARNING
Clear the area where you are working.
Avoid stumbling on obstacles and watch
out for holes or ditches. Be extremely
cautious when working on slopes or
uneven ground. Take extreme care in
wet and freezing weather (rain, snow,
ice.)
TSA 230
WARNING
Sparks are created when
cutting metal and some
other materials. They can
burn or cause clothing to
catch fire. Always direct
sparks away from the
operator or any flamma-
ble surroundings.
Flammable items can
include dry vegetation
and brush, particulary
when weather conditions
are hot and dry. Never
cut metal or other spark-
creating materials while
standing on a flammable
surface, such as wood,
dry vegetation or tar
paper. Where there is a
risk of fire, have appropri-
ate fire extinguishing
equipment readily
available.
WARNING
To reduce the risk of injury from fire, do
not cut into any pipe, drum or other
container without first ensuring that it
does not contain a volatile or flammable
substance.
WARNING
When cutting into existing walls, floors or
similar structures, be alert for hidden
hazards such as electrical cables, water
and gas pipes and flammable
substances. Make sure that power,
water and gas have been shut off and
pipes drained before starting to cut.
After finishing work turn off the cut-off
machine, set the locking lever to ƒ and
remove the battery from the cut-off
machine.
If the battery is not removed after
finishing work, there is the risk that the
plug-in contacts on the cut-off machine
and battery become corroded. Such
corrosion can cause irreparable damage
to the cut-off machine and battery. Allow
the cut-off machine and battery to dry
out separately if they are wet after use.
Operating Instructions
WARNING
To reduce the risk of severe personal
injuries from unintentional starting, avoid
contacting the trigger switch lockout and
trigger switch when grasping the rear
handle of the cut-off machine.
WARNING
It is extremely important that the wheel
guard is in place and set to suit the type
of work and your stance. By adjusting
the angle of the cut-off machine to the
work piece, you can influence the
direction of debris from the cutting
process. Operate your cut-off machine
so that the user is not endangered by
particles of the material being cut,
English
11