General Power Tool Safety Warnings - Stihl TSA 230 Manual De Instrucciones

English
Maintenance, Repair and Storing of the
Cut-Off Machine
Never operate a cut-off machine that is
damaged, improperly adjusted or not
completely or securely assembled.
Follow the maintenance and repair
instructions in the appropriate sections
of your instruction manual.
If you make a warranty claim for a
component that has not been serviced
or maintained properly or if
nonapproved replacement parts were
used, STIHL may deny warranty
coverage.
WARNING
Use only STIHL replacement parts for
maintenance and repair. Use of parts
manufactured by others may cause
serious or fatal injury.
WARNING
Always move retaining latch to ƒ and
remove the battery from the power tool
and make sure that the wheel is stopped
before doing any maintenance or repair
work or cleaning the cut-off machine. Do
not attempt any maintenance or repair
work not described in your instruction
manual. Have such work performed only
at your STIHL servicing dealer.
Regularly check the electrical contacts
and ensure that the insulation of the
power cord and plug of the charger is in
good condition and show no sign of
aging (brittleness).
Electrical components, e.g. power cord
of charger, may only be repaired or
replaced by a qualified electrician.
16
Clean plastic components with a cloth.
Do not use aggressive detergents. They
may damage the plastic.
Clean the ventilation slots if necessary.
Keep the battery guides free from
foreign matter – clean as necessary.
Clean off grinding dust after finishing
work.
Do not clean your machine with a
pressure washer. The solid jet of water
will damage parts of the machine.
For any maintenance please refer to the
maintenance chart and to the warranty
statement near the end of the instruction
manual.
Store composite wheels on a flat surface
in a dry place, preferably at a constant
temperature, where there is not a risk of
frost. Do not store a cut-off machine with
a wheel mounted on the machine.
Store the power tool in a dry, locked
location with retaining latch on ƒ, the
battery removed and out of reach of
children.
If the battery is not removed, there is the
risk that the plug-in contacts on the cut-
off machine and battery become
corroded. Such corrosion can cause
irreparable damage to the cut-off
machine and battery. Allow the cut-off
machine and battery to dry out
separately if they are wet after use.
General Power Tool Safety
Warnings
This chapter relays the prescribed
wording of general safety advice for
handheld motor-operated electric cut-off
machines contained in UL 60745-1 and
UL 60745-2-22.
The safety precautions and warnings on
avoiding an electric shock given under
"2) Electrical safety" do not apply to
STIHL cordless electric power tools.
WARNING
Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
Save all warnings and instructions for
future reference.
The term "power tool" in the warnings
refers to your mains-operated (corded)
power tool or battery-operated
(cordless) power tool.
1) Work area safety
a) Keep work area clean and well lit.
Cluttered or dark areas invite
accidents.
b) Do not operate power tools in
explosive atmospheres, such as in
the presence of flammable liquids,
gases or dust. Power tools create
sparks which may ignite the dust or
fumes.
c) Keep children and bystanders away
while operating a power tool.
Distractions can cause you to lose
control.
TSA 230