Diamond Abrasive Wheels - Stihl TSA 230 Manual De Instrucciones

Storage
Do not expose cutting wheels to
–
direct sunshine or other thermal
stresses during transport and
storage.
Avoid jolting and impacts.
–
Stack cutting wheels flat on a level
–
surface in the original packaging in
a dry place where the temperature
is as constant as possible.
Do not store cutting wheels in the
–
vicinity of aggressive fluids.
Store cutting wheels in a frost-free
–
place.
TSA 230

Diamond Abrasive Wheels

Most diamond cutting wheels are
suitable for wet cutting.
Economic benefit is improved and
premature wear can be avoided by
choosing and using the correct diamond
cutting wheel. The short name (see
following explanation)
on the label and
–
on the packaging (table with
–
recommended uses)
can help to ensure the correct choice.
STIHL diamond cutting wheels are
suitable, depending on the version, for
cutting the following materials:
Asphalt
–
Concrete
–
Stone (hard rock)
–
Abrasive concrete
–
Green concrete
–
Clay bricks
–
Clay pipes
–
Ductile iron
–
Structural steel up to 10 mm thick
–
Do not cut any unauthorized materials.
Cut-off machines are not suitable for
cutting certain metals and other
substances.
Never use diamond abrasive wheels
with abrasive material on their sides,
since in a pinch situation, they can result
in extreme kickback – Risk of severe or
fatal injury.
Short names
The short name is a combination of
letters and numerals with up to four
digits:
The letters indicate the main area of
–
use for the cutting wheel.
The numerals indicate the
–
performance class of the STIHL
diamond cutting wheel.
Radial and axial run-out
A correctly mounted spindle bearing on
the cut-off machine is essential for a
long service life and efficient operation
of the diamond cutting wheel.
Using a cutting wheel on a cut-off
machine with a malfunctioning spindle
bearing can lead to axial and radial run-
out.
English
25