Specifications - Stihl TSA 230 Manual De Instrucciones

English
Definitions
1. Battery Compartment
Accommodates the battery in the
unit.
2. Water Nozzle
Supplies the abrasive wheel with
water.
3. Spindle Lock
Must be depressed before the
wheel can be mounted or changed.
4. Abrasive Wheel
Can either be a composite abrasive
wheel or a diamond abrasive wheel.
5. Water Attachment
For connection of water supply for
wet cutting.
6. Shut-off Valve
Allows to shut off/on the water
supply.
7. Guard
Guards the wheel and deflects
sparks, dust, cutting debris or wheel
fragments.
8. Front Thrust Washer
Distributes clamping pressure of
mounting nut evenly over cutting
wheel.
9. Front Handle
Handlebar for the left hand of the
power tool.
10. Trigger Switch
Switches the motor on and off.
11. Trigger Switch Lockout
Must be depressed before the
trigger switch can be activated.
38
12. Rear Handle
The support handle for the right
hand.
13. Retaining Latch
Locks or unlocks the trigger switch.
14. Battery Locking Tabs
Secure the battery in the unit.
15. Battery
Supplies the motor with electrical
power.
16. Push Button
For activating light emitting diodes
(LEDs) on battery.
17. Light Emitting Diodes (LEDs) on
Battery
Indicate the state of charge and
operating condition of the battery.
18. Charger
Charges the battery.
19. Light Emitting Diode (LED) on
Charger
Indicates charger operating mode
and certain problems.
20. Power Supply Cord
Supplies electric current to charger.

Specifications

Battery
Type: Lithium-Ion
Designation: AP
The machine may be operated only with
original STIHL AP rechargeable
batteries.
Running time is dependent on the
energy content of the battery.
STIHL AP series rechargeable batteries
may be charged only with original
STIHL AL series chargers.
Charger
AL 100
Power supply: 120 V / 60 Hz
Rated current: 1.3 A
Power consumption: 75 W
Charge current: 1.6 A
Insulation: II, E (double
insulated)
AL 300
Power supply: 120 V / 60 Hz
Rated current: 4.7 A
Power consumption: 330 W
Charge current: 6.5 A
Insulation: II, E (double
insulated)
AL 500
Power supply: 120 V / 60 Hz
Rated current: 4.8 A
TSA 230