Stihl TSA 230 Manual De Instrucciones página 6

Ocultar thumbs Ver también para TSA 230:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

English
Clothing must be sturdy
and snug-fitting, but allow
complete freedom of
movement. Avoid loose-
fitting jackets, scarfs,
neckties, jewelry, flared
or cuffed pants, uncon-
fined long hair or
anything that could
become caught on any
obstacles or moving parts
of the unit. Wear overalls
or long pants to protect
your legs. Do not wear
shorts.
WARNING
When cutting metal, a cut-off machine
generates sparks that can ignite
clothing. Most fabrics used in clothing
are flammable – even flame-retardant
fabrics will ignite at higher temperatures.
To reduce the risk of burn injury STIHL
recommends wearing clothing made of
leather, wool, flame-retardant-treated
cotton or a tightly woven, heavier cotton
such as denim. Some flame-retardant
synthetic fabrics are also suitable, but
others such as polyester, nylon, rayon
and acetate can melt during a fire into a
tar-like matter that burns into the skin.
Check the clothing manufacturer's
instructions. Keep clothing free of oil,
fuel, grease and other flammable
substances.
4
Always wear heavy duty
work gloves (e.g. made of
leather or other wear
resistant material) when
handling the cut-off
machine. Heavy-duty,
nonslip gloves improve
your grip and help to pro-
tect your hands.
Good footing is important
in cut-off machine work.
Wear sturdy boots with
nonslip soles. Steel-toed
safety boots are
recommended.
WARNING
Loose objects may be thrown toward the
operator by the cutting tool.
To reduce the risk of
injury to your eyes never
operate a cut-off machine
unless wearing goggles
or close-fitting protective
glasses with adequate
side protection that are
impact-rated and marked
as complying with
ANSI Z87 "+". Proper eye
protection is a must.
Wear an approved safety hard hat to
protect your head. Cut-off machine
noise may damage your hearing. Always
wear sound barriers (ear plugs or ear
mufflers) to help protect your hearing.
Regular users should have their hearing
checked regularly.
WARNING
When wet cutting at the
recommended flow rate
is not utilized, the opera-
tor should always wear a
respirator approved by
NIOSH/MSHA for the
material being cut to
reduce the risk of serious
or fatal respiratory illness.
For additional details and
warnings on this subject,
see information under
"Working Conditions" in
this instruction manual.
THE POWER TOOL
For illustrations and definitions of the
parts of the cut-off machine, see the
chapter "Main Parts."
WARNING
Never modify a cut-off machine in any
way. Only STIHL replacement parts are
authorized, and only STIHL-branded
cutting attachments expressly approved
by STIHL for use with the specific STIHL
cut-off machine models are
recommended. Although certain other
parts or attachments may be useable
with the STIHL powerhead, their use
may, in fact, be extremely dangerous.
If your power tool is subjected to
unusually high loads for which it was not
designed (e.g. heavy impact or a fall),
always check that it is in good condition
before continuing work – see also
"Before Starting Work." Make sure the
safety devices are working properly. Do
not continue operating your power tool if
TSA 230

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido