Starting The Appliance/Heating; Power Saving Function - illy Ese Instrucciones De Uso

STARTING THE APPLIANCE/HEATING

Remove the cover of the tank.
To remove the tank, press it downwards while
simultaneously pushing it outwards.
Connect the machine by fitting the plug into
the socket.

Power saving function

• The machine is equipped with a system that allows it to switch to reduced energy consumption mode.
• If the machine remains switched ON without being used, it switches off automatically.
• To use the machine again, press the main switch and wait for the machine to heat up again.
1
Fill the tank up to the maximum level indicated
(MAX).
4
Turn the machine ON using the main switch.
The machine is ON when the main switch lights
up.
2
Insert the tank by tilting it slightly and placing
it on the water valve. Press the upper part into
the machine until a click is heard.
Refit the cover.
5
Buttons and flash intermittently;
when they stop flashing and remain illumi-
nated, the machine has reached the correct
temperature and is ready for use.
3
CAUTION: Make sure that the tank
is properly inserted to avoid water
leaks�
6
When the machine is in the heating
stage (delivery buttons flashing), it
cannot deliver coffee�
CAUTION: Once the initial heating is
complete, the machine will clean the
system by dispensing a small amount
of water� Do not place your hands near
the coffee dispenser spout� Once this
operation is complete, the machine is
ready to dispense coffee�
EN
21