Descaling - illy Ese Instrucciones De Uso

DESCALING

Limescale accumulation is a normal result of machine use. The machine has an automatic programme that helps optimise cleaning and removes scale deposits from the interior.
CAUTION: If the descaling procedure is not carried out, scale may cause malfunctions that are not covered by the warranty�
If the dispensing buttons flash in alternation, the machine must be descaled.
PLEASE NOTE:
- Make sure that there are no E�S�E� pods inside the machine�
- If there is a voltage drop or the machine is switched off, the cycle continues from where it was stopped when switched on again�
- Do not lift the lever when descaling or rinsing�
Descaling procedure:
Turn the machine OFF using the main switch.
1
Fill the tank with 0.6 lt of fresh water and add
the descaling solution.
Make sure that the descaling solution has fully
dissolved in the water in the tank.
2
0,6 L
Place a container of at least 0.6 lt under the
dispenser.
3
Turn the machine off by pressing the
button for 5 seconds. The button flashes.
EN
4
27