Cleaning And Maintenance - Baby auto irbag top Manual De Uso

6. ClEaNiNg aND MaiNTENaNCE

Removing
1. To remove the cover for cleaning, you must
release the shoulder straps from the yoke and
untie the cords at the back of the child seat, pull
these through to the front of the seat (6.1).
2. Unclip the studs on both rear sides on the seat
(6.2).
3. Carefully pull down the cover from the clip (6.3).
4. Push the buckle and the buckle straps through
the slots in the cover to release and pull it clear
(6.4).
(Q) Prongs
(D)
Harness buckle
(F)
Harness adjustment strap.
cleaning the seat
1. Wash the straps and plastic parts with neutral
detergent and warm water.
2. Ensure that no soap enters the buckle or metal
parts.
3. Do not use chemicals or bleach on any part of the
chair.
4. Dry thoroughly before use.
WaSHiNg iNSTrUCTioNS:
- The cover can be removed and washed at 30 °C.
it should only be air-dried.
- Machine wash, cold.
- Do not use bleach.
- Dry clean, any solvent except trichlorethylene.
- Do not use a dryer.
- Do not iron.
if you have any question about using or installing this product,
or if you need a spare part contact our Customer Service.
32
30 °C