Britax ONE4LIFE CLICKTIGHT Guia Del Usuario página 35

8. Place child restraint on
the vehicle seat so that the
car seat base is flat on the
vehicle seat and is parallel to
vehicle seat.
NOTE: If your vehicle seat
back is adjustable, ensure
it is in the upright position
before placing the child seat
on the vehicle seat.
9. Ensure the base does not
hang over front edge of
vehicle seat.
10. Route the lower connector
strap through the
FORWARD-facing belt
path marked by green
labels. Firmly press the
lower connectors onto their
adjacent anchors until a
click is heard.
11. Ensure the connector strap
is not twisted and remove
slack.
12. Close the CLICKTIGHT
over the lower connector
strap.
13. Ensure both CLICKTIGHT
release buttons are visible.
NOTE: If it is difficult
to close, you may have
removed too much slack.
14. Connect the top tether hook
to the vehicle's top tether
anchor (check the vehicle
owner's manual for location).
15. Pull the top tether strap to
remove slack and secure
excess webbing with the
elastic band attached.
ADJUSTMENT
SLOT
33