Britax ONE4LIFE CLICKTIGHT Guia Del Usuario página 9

Aircraft
For aircraft installation the top tether cannot be used.
For REAR-facing aircraft installation:
1. Recline this child restraint
(see page 15) and place
REAR-facing on the aircraft
seat.
2. Slide the aircraft lap belt
into the REAR-facing belt
path over the cover with
the CLICKTIGHT in the
closed position.
3. Ensure the lap belt is
not twisted, buckle, and
remove all slack.
For FORWARD-facing aircraft installation:
1. Place this child restraint
FORWARD-facing on
the aircraft seat.
2. Slide the aircraft
lap belt into the
FORWARD-facing belt
path under the cover
with the CLICKTIGHT in
the closed position.
3. Ensure the lap belt is
not twisted, buckle, and
remove all slack.
NOTES:
• For further instructions on securing your child and
adjusting fit see page 34.
• Install your child restraint in a window seat to avoid
blocking the aisle.
• If the aircraft lap belt is too short, ask a flight attendant
for a belt extender.
• Your child may experience discomfort if the buckle is
located in the seating area of the child restraint after
installation.
• Inflatable aircraft lap belts are not compatible with this
child restraint.
• This seat may not fit all aircraft. Contact your airline prior
to travel to verify fit.
7