Britax ONE4LIFE CLICKTIGHT Guia Del Usuario página 30

9. Route the lower connector
strap through the
FORWARD-facing belt path
marked by green labels.
10. Firmly press lower
connectors onto their
adjacent anchors until a
click is heard.
11. Ensure the connector strap
is not twisted. Pull the end
of the lower connector strap
to remove slack.
12. Close the CLICKTIGHT
over the lower connector
strap.
13. Ensure both CLICKTIGHT
release buttons are visible.
NOTE: If it is difficult
to close, you may have
removed too much slack.
14. Connect the top tether hook
to the vehicle's top tether
anchor (check the vehicle
owner's manual for location).
15. Pull the top tether strap to
remove slack and secure
excess webbing with the
elastic band attached.
NOTE: Do NOT install by this method for a child weighing
more than 35 lb (16 kg).
28
ADJUSTMENT
SLOT
ADJUSTMENT
SLOT