Baxi CBP Matic 18 Manual De Instrucciones página 195


Power settings
This feature allows you to increase or decrease by 25% the amount of pellets at each
power level. Press "set". The display starts to flash. Press "+" or "-" to increase or
reduce (from -5 to +5), accordingly. Each unit must be multiplied by 5 to obtain the
correct percentage. Press "ok" to confirm. Press "esc" to return to the "Receita de
pellets" (Pellet Qty) menu and "+" to go to the "Termostato" (Thermostat) menu.
 Thermostat
This feature allows you to enable or disable the room temperature thermostat.
Press "set"; the display starts to flash. Press the "+" or "-" key to select the "On" or
"Off" and then "ok" to confirm. Press the "+" key to go to the "Carga Pellet" (Pellet
loading) menu.
 Pellet loading
This feature allows you to enable the worm drive to fill the channel when it is empty
to keep the unit running. Press "set"; the "ok" option appears. Press "ok" to activate
the drive (the "habilitada" (Activated) message appears) and "esc" to stop it. Press
the "+" key to go to the "Limpeza" (Cleaning) menu.
MODE
MAN
AUT
esc 0
ESC
OFF
< Potência
OFF
OFF
-
MODE
MAN
AUT
esc Off
ESC
OFF
< Termostato
OFF
OFF
-
MENU
ON
Set
OFF
OK
OFF
>
OF
OFF
+
F
MENU
ON
Set
OFF
OK
OFF
>
OF
OFF
+
F
32