Baxi CBP Matic 18 Manual De Instrucciones página 184

7.2. Display information summary
Menu
Menu indicating the room temperature in ºC, the time and that the boiler is "OFF".
"Auto" mode: in this mode, the unit shall be turned on at maximum power until
reaching a temperature of 1ºC above the temperature selected (set point
temperature). Upon reaching the set temperature, the unit changes to minimum
operating power.
The set-point temperature can be set between 5 and 35ºC by pressing the "-" key.
The "+" key allows the user to set the ventilation speed between 1-5 and automatic
mode.
Water temperature
Press the Menu key twice to set the water temperature;
"Temp. Agua" (Water Temp.) appears on the display. Press Set to see the "T.
Aquecimento" (Heating T.) menu.
 Heating temperature
To set the desired heating temperature press "set"; the display starts to flash. Press
the "+" or "-" key to select the desired value and then "ok" to confirm. Press the "+"
key to go to the "Temperatura de sanitários" (Bathroom Temperature) menu.
MODE
MAN
AUT
20.5ºC
ESC
OFF
OFF
OFF
OFF
-
MODE
MAN
AUT
esc
ESC
OFF
< Temp. Água
OFF
OFF
-
MENU
ON
16:03
OFF
OK
OFF
OF
OFF
+
F
MENU
ON
Set
OFF
OK
OFF
>
OF
OFF
+
F
21