Setting Memory Bank / User; Setting Date And Time - smartheart Talking Manual De Instrucciones

SETTING MEMORY BANK / USER

This unit offers 4 memory banks, allowing for tracking of multiple
user results in the household with the same monitor.
With power off, press SET button to enter the system set-up
1.
functions.
2. The User / Memory Bank in use will show on the upper
right of the display screen.
Press the M button to scroll through the users until the desire
3.
user is shown, 1, 2, 3, or 4. The User selected will default
to the selected user every time the device is powered on
until a new user is selected.
After selection, press START/STOP to exit set-up, or press SET to confirm
4.
and move to the Date and Time setting feature.

SETTING DATE AND TIME

IT IS NECESSARY TO SET THE DATE AND TIME FOR THE UNIT EVERY TIME
BATTERIES ARE INITIALLY INSTALLED OR REPLACED.
IF YOU CHOOSE NOT TO SET THE DATE AND TIME, YOU MAY PRESS THE
START/STOP BUTTON TO FORWARD THROUGH THE TIME AND DATE
FEATURE WITHOUT SETTING A PREFERENCE.
After setting the Memory Bank, the screen will advance to
setting the Date and Time.
1. The month will blink on the lower left of the display; press
M to advance to the desired Month. Press SET to confirm.
2. Repeat Step 1 to confirm the Day, Hour and then Minutes.
After selection, press START/STOP to exit set-up, or
3.
press SET to confirm and move to the Language Selection
feature.
10 • ENGLISH
M D