Setting The Zeroing Range - Leica RANGEMASTER 2000-B Manual De Instrucciones

4. Press the main button several times to select the relevant
ballistic curve, i.e.
- to or
EU1 EU12
- to , or
US1 US12
if you want the range to be displayed without the impact
point correction ( ) (see p. 36).
AbC
- .
OFF
5. Save your setting by briefly pressing the secondary button.
• The saved setting is lit continuously for 4s as confirma-
tion, then the display changes first to the zeroing range
setting ( ) and then disappears
SId
If a ballistic curve is set, after each range measurement the
range value is first displayed for 2s, then the calculated cor-
rection value for 6s.

SETTING THE ZEROING RANGE (

Start with step 1 if you have not previously opened the menu
control, or with step 3 if you have just specified the ballistic
curve and is still flashing in the display.
Sld
1. Press and hold the secondary button (1) (≥3s).
• The display shows
2. Press the secondary button briefly (<2s) twice.
• The display changes to
3. Press the main button (2) several times to select the
required zeroing range.
- [m],
100
- [m], or
200
- [m], or
GEE
- [y], or
100
- [y], or
200
- [y].
300
4. Save your setting by briefly pressing the secondary button.
• The saved setting is lit continuously for 4s as confirma-
tion, then the display changes first to
appears.
35
)
SId
.
USEU
and then to SId.
bALL
and then dis-
AbC