The End Of Operation; Emptying The Hopper - GASPARDO S MARIA Serie Empleo Y Mantenimiento

4.15 THE END OF OPERATION

At the end of the work processes, stop all the mechanical moving
parts in safe conditions. Let the machine sit on the ground, stop
the engine, remove the ignition key and engage the parking brake.

4.15.1 EMPTYING THE HOPPER

Proceed as follows to emptying the seeds from the hopper:
1) Extract the lock pin (A, Fig. 436) and move the bush housing
in the direction of the arrow.
2) Release the collecting trays and position them beneath the
seed discharge.
3) For large quantities, it is advisable to use the handle on the
gear shift to rotate the agitator shaft (Fig. 437) to better control
seed ow into the bins. To empty small amounts of seeds, shift
the doser lever beyond position «7» (Fig. 438).
4) After seed discharge has been completed, return the bush
housing to their initial work positions. Extract the lock pin (A,
Fig. 439) and, using the handle, move the seed collectors
support in the direction of the arrow.
cod. G19503221
USE AND MAINTENANCE
g. 436
g. 437
g. 438
g. 439
A
A
ENGLISH
EN - 67