Repair; Accessories - Festo HGDS-12 Instrucciones De Utilizacion

HGDS−...
11

Repair

If necessary:
Order the wearing parts as specified in the catalogue.
S
Transfer the gripper fingers from the old gripper to the new one.
S
Existing gripper fingers will generally fit grippers of the same type without the
need for readjustment.
Send the defective unit to Festo this step is vital.
S
Any overhauling of the HGDS−... must be carried out exclusively by our
S
servicing specialists.
The repair process calls for delicate setting work.
Please describe the fault and the operating conditions in your correspon
dence.
12

Accessories

Designation
Adapter plates
Proximity sensor
Shock absorber
Grease
Gripper
Stop cam (only with shock absorber version)
Fig. 20
38
Type
HMSV−...
SMx−10..−...
YSRT−...
Molycote PG 75
Klüber BE 31−222
Festo HGDS−... 0307NH English