Resetting All Values (Reset) - Balluff BTL6-A/C/E/G500-M-PF-S115 Serie Manual De Instrucciones

BTL6-A/C/E/G500-M _ _ _ _ -PF-S115
Micropulse Transducer in a Flat Profile Housing
9

Resetting all values (reset)

NOTICE!
Interference in function
Resetting the values while the system is running may
result in malfunctions.
Stop the system before performing the reset.
f
The reset function can be used to restore all the settings
to the factory settings. For a reset the magnet may also be
located outside the measuring range.
1. Activate reset
►
Simultaneously activate
2. Reset
►
Simultaneously activate
After activation:
⇒ All values are reset.
⇒ Current position value is displayed.
⇒
Reset is deactivated.
3. Abort reset
Resetting can be aborted without any changes
being saved after the Activate reset step.
►
Briefly activate a and
⇒
Current position value is displayed.
16 english
a and for at least 4 s.
b
a and for at least 4 s.
b
simultaneously (< 1 s).
b
LED legend:
LED display
LED
a
b
> 4 s
a
b
> 4 s
a
b
< 1 s
LED green LED flashing green
LED red