Kärcher SB MU Manual De Instrucciones página 63

Display Cause
F 073 Current pickup of high pressure pump at washing station 4 too low
F 074 Contact of high pressure pump at washing station 4 stuck
F 075 Semiload valve at washing station 4 defective
F 076 Coiling protection contact of high pressure pump washing station 4 has
triggered.
F 077 Oil level of high pressure pump at washing station 4 too low
F 078 Electronics at washing station 4 defective
F 080 No connection to remote control electronics at washing station 4
F 081 Fault at coin acceptor at washing station 4
F 082
F 090 No connection to pump electronics at washing station 5
F 091 Electronics outlets at washing station 5 overloaded
F 092 Current consumption of high-pressure pump at washing station 5 too
high
F 093 Current consumption of high-pressure pump at washing station 5 too
low
F 094 Contactor of high-pressure pump at washing station 5 jammed
F 095 Semiload valve at washing station 5 defective
F 096 Thermal motor protection switch of high pressure-pump washing sta-
tion 5 has tripped.
F 097 Oil level of high-pressure pump at washing station 5 too low
F 098 Electronics at washing station 5 defective.
F 100 No connection to remote control electronics at washing station 5
F 101 Fault at coin validator at washing station 5
F 102
F 110 No connection to pump electronics at washing station 6
F 111 Electronics outlets at washing station 6 overloaded
F 112 Current consumption of high-pressure pump at washing station 6 too
high
F 113 Current consumption of high-pressure pump at washing station 6 too
low
F 114 Contactor of high-pressure pump at washing station 6 jammed
F 115 Semiload valve at washing station 6 defective
F 116 Thermal motor protection switch of high pressure-pump washing sta-
tion 6 has tripped.
F 117 Oil level of high-pressure pump at washing station 6 too low
F 118 Electronics at washing station 6 defective.
F 120 No connection to remote control electronics at washing station 6
F 121 Fault at coin validator at washing station 6
F 122
F 130 No connection to pump electronics at washing station 7
F 131 Electronics outlets at washing station 7 overloaded
F 132 Current consumption of high-pressure pump at washing station 7 too
high
F 133 Current consumption of high-pressure pump at washing station 7 too
low
F 134 Contactor of high-pressure pump at washing station 7 jammed
F 135 Semiload valve at washing station 7 defective
F 136 Thermal motor protection switch of high pressure-pump washing sta-
tion 7 has tripped.
F 137 Oil level of high-pressure pump at washing station 7 too low
F 138 Electronics at washing station 7 defective.
F 140 No connection to remote control electronics at washing station 7
Remedy
See "Faults on high pressure pumps"
Call customer service.
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
Refill oil, acknowledge the fault.
Call customer service.
Check the connector of the data cable with the elec-
tronics of the remote control.
Call customer service.
Check the microswitch on the mechanical coin ac-
ceptor, replace electronic coin acceptor
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
See "Faults on high pressure pumps"
Call customer service.
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
Refill oil, acknowledge the fault.
Call customer service.
Check the connector of the data cable with the elec-
tronics of the remote control.
Call customer service.
Check the microswitch on the mechanical coin ac-
ceptor, replace electronic coin acceptor
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
See "Faults on high pressure pumps"
Call customer service.
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
Refill oil, acknowledge the fault.
Call customer service.
Check the connector of the data cable with the elec-
tronics of the remote control.
Call customer service.
Check the microswitch on the mechanical coin ac-
ceptor, replace electronic coin acceptor
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
See "Faults on high pressure pumps"
Call customer service.
Acknowledge the fault. If the fault recurs, call cus-
tomer service.
Refill oil, acknowledge the fault.
Call customer service.
Check the connector of the data cable with the elec-
tronics of the remote control.
26
-
EN 63