Operations Procedure - Kärcher SB MU Manual De Instrucciones

Operations procedure

1 Rest value display
2 Program selection switch
3 Throwing in the coin
 Select the washing programme using
the programme selection switch.
 Throw in the coin.
Single tool version
1 Washing brush
2 Locking lever
3 Hand spray gun
4 Lever for trigger gun
5 Safety lever
 Press the locking lever for washing us-
ing high-pressure jet; pull the washing
brush towards the rear and lock it in.
 To wash using the washing brush,
press the locking lever, push the wash-
ing brush forward and lock it in.
 Unlock the trigger gun and pull the lever
of the gun.
Double tool version
The hand-spray gun and washing brush
are available as separate tools.
Hand spray gun:
 Unlock the trigger gun and pull the lever
of the gun.
Washing brush:
 Clean the washing brush with the hand
spray gun prior to use.
 Set the washing programme "foam
wash" and clean the vehicle.
Washing time
– Washing time starts after the coin is
thrown in.
– The remaining value display shows the
remaining washing credit in washing
units.
NOTICE
The washing time is on even if the pro-
gramme selection switch is in the "STOP"
position.
If more coins are thrown in during the wash-
ing time, the same are registered and add-
ed to the existing washing time.
40
3
-
EN