Settings At The Switch For Washing; Disabling The Washing Operation - Kärcher SB-HDW S 1 Manual De Instrucciones

SB-HDW S 1 / SB-HDW S 2
B Operating information and
settings
Operating Instructions

2.2. Settings at the switch for washing

2.2.1. Disabling the washing operation

For example, at night or on Sundays and public holidays.
This is achieved by switching off the control circuitry.
The system is still connected to the mains electricity supply,
and switches into the sub-zero protection mode when there is
a danger of freezing temperatures.
i
Important!
The sub-zero temperature protection is only active with the
system in operation and the door closed. Therefore the
switch on the control panel must not be positioned in 0/
STOP. The door must be closed. The system must remain
connected to the mains electricity supply.
Both rocker switches for the hot-air blower must be in the "I"
position. The thermostat must be set to "5".
In order to obtain frost protection, further requirements must
be met. For this reason it is important to read chapter B.6
"Frost protection".
Setting at the switch for washing:
Switch
I
position
I
O
O
Function
Control circuitry is switched on,
system cleared for washing
Control circuitry is switched off,
washing is disabled,
Display is at "OFF".
Slots of the coin-acceptor unit are closed,
frost protection arrangements are active
when there is frost risk.
English
B 5