Run Times - Nelson SMARTZONE Manual De Instrucoes

PROGRAMMING INSTRUCTIONS
4. Set Daily Scheduling Option
Press green Daily key on circular pad. The current program letter will
be displayed along with a set of water drops that shows the daily
schedule.
OPERATION:
OFF
TIME
ON
SENSOR
START TIME
OVERRIDE
ZONE/
RUN TIME
%WATER BUDGET
PROGRAM INTERVAL
S M T W TH F S ODD/EVEN
OFF/ON PROGRAM ZONE NEXT PROGRAM
ZONE NUMBER
SENSOR
ON/OFF ON/OFF (HOLD FOR REVIEW)
OVERRIDE
NOTE: If a Daily schedule was not previously set, all seven drops will
be shown.
To select which days to water, press the gray
you wish to water, or press the gray
water. The cursor (triangle) above the day of the week will automatically
move to the right with each press of a button.
NOTE: Programming a Daily schedule deletes any other schedules
for that program.
5. Set Odd/Even Day Scheduling Option
To utilize Odd/Even option, the current date must be programmed. If
you have not set the date, the LCD will prompt you to enter one. After
programming the date, you may proceed with Odd/Even scheduling
steps.
If you want an Odd day schedule, press the green Odd/Even button.
You do not have to press any other key. The water drop above the
Odd selection will stop flashing after 5 seconds, indicating an Odd
schedule has been chosen.
To set an Even day watering schedule, press the green Odd/Even
button twice to change to an even day schedule. The water drop at
the Even position will stop flashing after 5 seconds, indicating an Even
schedule has been chosen.
OPERATION:
OFF
TIME
ON
SENSOR
START TIME
OVERRIDE
ZONE/
RUN TIME
%WATER BUDGET
PROGRAM INTERVAL
S M T W TH F S ODD/EVEN
OFF/ON
PROGRAM ZONE NEXT PROGRAM
ZONE NUMBER
SENSOR
ON/OFF ON/OFF
(HOLD FOR REVIEW)
OVERRIDE
If an Odd/Even program has been previously set, the SmartZone™
will return to the previous selection. To change to the other option,
press the Odd/Even button again, until the correct water drop indicator
is displayed.
NOTE: Programming an Odd/Even schedule deletes any other
schedule for that program.
PROGRAMMING:
TIME
START
TIMES
CURRENT
DAY
DATE
%
WATER
BUDGET
DAILY
RUN
ODD / EVEN
TIME
INTERVAL
when you reach the days
on the days you do not wish to
PROGRAMMING:
TIME
START
TIMES
CURRENT
DAY
DATE
%
WATER
BUDGET
DAILY
RUN
ODD / EVEN
TIME
INTERVAL
6. Set Interval Scheduling Option
Press green Interval key on circular pad. The interval number and
date will blink and the program letter will be displayed. Use gray
triangle or key to change the watering interval to any number of
days from 1 to 30.
OPERATION:
OFF
TIME
ON
SENSOR
START TIME
OVERRIDE
ZONE/
RUN TIME
%WATER BUDGET
PROGRAM INTERVAL
S M T W TH F S ODD/EVEN
OFF/ON NEXT PROGRAM
PROGRAM ZONE
ZONE NUMBER
SENSOR
ON/OFF ON/OFF (HOLD FOR REVIEW)
OVERRIDE
The date displayed will be the first day of the interval. If the date is still
set for 01/01, a date has never been set (see page 6 Set Today's
Date). To adjust the date at the interval display (up to 30 days), press
the zone or button until the proper date you wish to be day one
of the interval is displayed.
If you want to view the next watering date, press the green Interval
key, followed by the blue Date key. If today is a watering day then
today's date is displayed here. The only time a different date is
displayed is on a non-watering date. Is independent of a present date.
Also will adjust itself if a new date is entered, the next scheduled
watering date will be displayed.
OPERATION:
OFF
TIME
ON
SENSOR
START TIME
OVERRIDE
ZONE/
RUN TIME
%WATER BUDGET
PROGRAM INTERVAL
S M T W TH F S ODD/EVEN
OFF/ON PROGRAM ZONE NEXT PROGRAM
ZONE NUMBER
SENSOR
ON/OFF ON/OFF (HOLD FOR REVIEW)
OVERRIDE
NOTE: Programming an Interval schedule deletes any other schedule
for that program.
7. Set Zone Run Times
A zone run time determines the duration a zone will run. To set a run
time, press the purple Run Time button on the circular key pad. The
program letter and zone number will be displayed and the run time will
flash. If the zone displayed is not the one you wish to set, press the white
zone or key until the proper zone number is displayed. Change
the run time with the gray
OPERATION:
OFF
TIME
ON
SENSOR
START TIME
OVERRIDE
ZONE/
RUN TIME
%WATER BUDGET
PROGRAM INTERVAL
S M T W TH F S ODD/EVEN
OFF/ON PROGRAM ZONE NEXT PROGRAM
ZONE NUMBER
SENSOR
ON/OFF ON/OFF (HOLD FOR REVIEW)
OVERRIDE
PROGRAMMING:
TIME
START
TIMES
CURRENT
DAY
DATE
%
WATER
BUDGET
DAILY
RUN
ODD / EVEN
TIME
INTERVAL
PROGRAMMING:
TIME
START
TIMES
CURRENT
DAY
DATE
%
WATER
BUDGET
DAILY
RUN
ODD / EVEN
TIME
INTERVAL
or key as needed.
PROGRAMMING:
TIME
START
TIMES
CURRENT
DAY
DATE
%
WATER
BUDGET
DAILY
RUN
ODD / EVEN
TIME
INTERVAL
7