Epson SureColor S Serie Guía De Referencia Rápida página 10

| Loading Media
8
Raise the media loading lever and pull out the media by hand and insert it approximately 12 inches
7.
(30 cm) into the printer. Then lower the media loading lever.
For the S30675, make sure the left edge of the media passes over the center of the square in the label
8.
on the pre-heater (the media sensor).
For the S50675/70675, make sure the edges of the media pass within the square that was adjusted in
step 3.
S30675 S50675/S70675