Epson SureColor S Serie Guía De Referencia Rápida página 20

| Cutting Off and Removing Prints
18
Move the media holding plates out of the way.
4.
Using a razor blade or other cutting tool, cut off your print along the cutter groove.
5.
If you are using the auto take-up reel, set the
6.
switch. Then remove the take-up roll.
Manual
If you are finished using the media, remove it from the roll holders, reversing the steps you followed to
7.
load it.
WARNING: Do not place your fingers in the path of
the cutting tool to avoid injuring yourself.
switch to and wind the media using the
Auto off