Epson SureColor S Serie Guía De Referencia Rápida página 37

Caution: Before handling the waste ink, read the Material
Safety Data Sheet (MSDS) for your printer. You can download it
from Epson's support website at epson.com/support (U.S.) or
epson.ca/support (Canada).
The waste ink from the printer is industrial waste. Proper waste
ink disposal in compliance with the industrial waste disposal
laws and ordinances of your local government is required.
Consign disposal of waste inks to an industrial waste disposer.
Please provide the Waste Ink Data Sheet to the industrial waste
disposer.
WARNING: Wear protective eyewear and gloves. If waste ink
contacts your skin or enters your eyes or mouth, immediately
take the following actions:
If fluid adheres to your skin, immediately wash it off using large
volumes of soapy water. Consult a physician if the skin appears
irritated or is discolored.
If fluid enters your eyes, rinse immediately with water. Failure
to observe this precaution could result in bloodshot eyes or
mild inflammation.
If fluid is swallowed, consult a physician immediately; do not
induce vomiting.
After replacing waste ink tank, wash your hands thoroughly.
Put on plastic gloves, then remove the waste ink tank
1.
from its holder, as shown on the right.
Insert the waste ink tube into the mouth of the new
2.
tank and place the tank in the holder.
Caution: Make sure you keep the lid from the waste ink tank so you can use it when disposing of waste ink.
Tightly seal the lid on the used waste ink tank.
3.
Press the button, then make sure the new tank is installed correctly, and press
OK
4.
the waste ink counter.
Dispose of the waste ink in compliance with industrial waste disposal laws and local government
5.
ordinances as required in your area.
Disposing of Waste Ink
again to reset
OK
|
35