Cutting Off And Removing Prints - Epson SureColor S Serie Guía De Referencia Rápida

|

Cutting Off and Removing Prints

16
Position the right and left tensioner media guides until they lightly touch the media. If you are using
11.
banner media, attach three counterweights to both ends of the tension bar.
Cutting Off and Removing Prints
Make sure
Ready
1.
Note: If you are using the auto take-up reel, set the Auto switch to off before using the Manual switch to
position the media over the cutter groove.
Press the Media feed button and the
2.
position.
appears on the LCD screen.
button. The printer feeds the media to the cutting
OK