Epson SureColor S Serie Guía De Referencia Rápida página 16

| Using the Auto Take-up Reel
14
Cut off about 24 inches (60 cm) of paper tape and attach it to the media using adhesive tape. Then
7.
hold down the d button until the tip of the tape reaches the center of the pipe.
Attach the media to the take-up roll core.
8.
You can take up the media either counterclockwise (printed
side out) or clockwise (printed side in).
Using adhesive tape, attach the paper tape to the take-up roll
as shown below:
Printed side out
Printed side out
Printed side in
Printed side in