Cleaning The Wiper And Around The Caps - Epson SureColor S Serie Guía De Referencia Rápida

Cleaning the Wiper and Around the Caps

Clean the wiper, caps, and wiper rail at least once a day. You may need to clean them more often if you
notice blurred ink or gaps in your prints after cleaning the print head nozzles. In addition to the
maintenance kit that came with the printer, you need protective eyewear and a mask to protect your nose
and mouth.
Note: If you need more maintenance kit supplies, you can order an additional printer maintenance kit. See
page 39 for ordering information.
Caution: Ink cleaner should be used only to clean the area around the wiper, caps, and print head. Used ink
cleaner should be disposed of in the same way as used ink.
Caution: You must complete this cleaning process within 10 minutes to prevent the print head from drying out.
Press the Maintenance button, then select
#
1.
Press again to move the print head to the cleaning position.
OK
2.
Open the right maintenance cover.
3.
Cleaning the Wiper and Around the Caps
and press
Head Maintenance
|
29
.
OK