Introduction; Proper Use; Features And Equipment - Parkside PTS 450 A1 Instrucciones De Utilización Y De Seguridad

Sierra de incisión
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

Introduction

The following pictograms are used in these operating instructions / on the device:
Read instruction manual!
Observe caution and safety notes!
Caution – electric shock!
Danger to life!
V ~
Volt (AC)
n
Design no­load speed
0
W
Watts (Effective power)
Plunge saw PTS 450 A1
Introduction
Q
Please make sure you familiarise your­
self fully with the way the device works
before you use it for the first time and
that you understand how to handle electrical pow­
er tools correctly. To help you do this please read
the accompanying operating instructions. Keep
these instructions in a safe place. If you pass the
device on to anyone else, please ensure that you
also pass on all the documentation.

Proper use

Q
This machine is primarily intended for the sawing,
longitudinally and transversely, of solid wood, chip­
board, plywood, aluminium, tiles, stone, plastic and
lightweight construction materials held in a fixed
position. Please note that the blade pre­installed in
the saw as supplied is intended for use with wood
only. Any other use or modification to the device
shall be considered as improper use and could
give rise to considerable dangers. Not suitable for
commercial use.
36 GB/MT
Safety class II
Risk of explosion!
Keep children away from
electrical power tools!
Risk of loss of life by electric shock from
damaged mains lead or mains plug!
Wear hearing protection, dust
protection mask, protective glasses
and protective gloves.
Dispose packaging and appliance in
an environmentally­friendly way!

Features and equipment

Q
Mechanical plunge stop
1
Mains On / Indicator LED
2
Mains lead
3
Holder for Allen key
4
Ventilation slots
5
Cover for carbon brushes
6
ON / OFF switch
7
Cutting depth setting clamp
8
Cutting depth scale
8 a
Base plate
9
Guide fence slot
10
Guide fence
11
Wing screw for guide fence
11 a
Spindle lock
12
Connection for dust extraction
13
Saw blade
14
Clamping flange
15
Clamping screw and plain washer
16
Dust extraction hose
17
Saw blade with hardened metal teeth Z85 / 30
18
Diamond saw blade Z85VR
19
HSS saw blade Z85 / 36
20

Publicidad

Tabla de contenido
loading

Tabla de contenido